Revit Freedom H2O WP Heated Motorcycle Gloves

The heated Freedom H2O motorcycle glove har REV'IT given a sleek and stylish look and a fine grip feel and, of course, the THERMOTRONIC high-tech system that keeps your hands at the ideal temperature of about 33 degrees Celsius regardless of weather conditions such as wind, humidity and cold. THERMOTRONIC has four different heat levels (from low to high) that can be easily adjusted with the large knob on the upper part of the glove. Thanks to the colored ring around the knob, it is very easy to see which heat level is currently applied. The exterior of the glove is made of flexible softshell material on the upper hand and grippy leather on the palm. The synthetic lining is combined with Exkin® Platinum® insulation for a definite feeling of comfort and protection from the cold right away. By using a soft knuckle shell gloves is very comfortable to wear, but still delivers plenty of safety. The Hydratex|Z-Liner construction guarantees one hundred percent waterproofness. Furthermore, reflective stripes and logos are found on the top of the hand to increase your visibility without disturbing the clean and fresh look glove. Not to mention the conductive fingertip. With it you can operate touchscreens without having to take off the glove, a great advantage in cold weather. The Freedom H2O motorcycle glove takes the terror out of winter.

Features:

• Outer fabric: flock PU, conductive fabric at fingertips, softshell 3L, taslan, drum dyed water repellent goatskin and twill stretch
• Stretch fabric on the fingers
• Adjustment strap on the wrist
• Elastic drawstring on the cuff
• Wrist strap
• Tri-fleece lining
• Battery pack REV'IT! Thermotronic heating technology
• Long cuff
• Conductive fabric on index finger and thumbs
• Visor wiper
• Hydratex®|Z-Liner waterproof membrane
• Exkin® Platinum® insulation material
• Permanently installed REV'IT! Thermotronic heating system
• Fixed integrated lining
• High-Loft fur lining

Specifications:

• EN 13594:2015 Level 1 KP
• PWR|Shield on the palm
• Temperfoam® palm slider
• Viscoelastic knuckle
• Laminated reflector on finger and back of hand

Battery Specifications:

• Power: 7.4 volts, 2350mah
• Input: Micro 5v 2a
• DC connection output: 4v At Max. 1.8a
• USB port output: 5v 2.1a
• Led battery meter
• Charging Time: 4 - 5 hours*
• Size: 7.4 X 5.0 X 1.4 cm

Heating Levels:

• Mode 1: 25% - White - Eco - 375 minutes (6.25 hrs.)
• Mode 2: 50% - Yellow - Medium - 300 minutes (5 hours)
• Mode 3: 75% - Orange - High - 225 minutes (3.75 hrs.)
• Mode 4: 100% - Red - Boost - 150 minutes (2.5 hrs.)

Contents:

• 1x Revit Liberty H2O WP Heated Motorcycle Gloves.
• 2x 7,4 V batteries
• 1x Micro-USB cable

Manufacturer Note: *Charge time is based on using a USB-A wall charger that delivers 5V at 2.1A.

Material: 

• 66% polyester, 26% goatskin, 6% polyurethane, 2% elastane
• Contains non-textile parts of animal origin.