Hyper digital monometer

Features:

Automatic Shut Off After 180 Seconds of Non-Usage:

• This feature conserves battery life by turning the device off if it hasn't been used for 180 seconds, increasing battery longevity.

Clear, LCD Display with Backlit Screen:

• The device has an LCD screen that shows measurements clearly, even in low light conditions, thanks to the backlighting.

Measuring Range from 0-160 PSI (±2%, at 25°C):

• The device can measure pressure between 0 and 160 PSI with an accuracy margin of ±2% at a standard temperature of 25°C.

Hose Rotation & 360 Degree Clip Tip:

• This refers to the flexibility of the hose, allowing for easy rotation and better usability. The clip tip rotates fully for convenience while inflating tires from different angles.

Extra Long Hose Length (50 cm):

• A 50 cm hose offers additional flexibility and reach, making it easier to access hard-to-reach valves.

Air Inlet: 1/4:

• The air inlet size is 1/4 inch, a standard size for air compressors and pneumatic tools.

Operating Pressure: 90 PSI:

• The device functions best when connected to an air source that provides 90 PSI of pressure.

Air Flow Rate of 1.54 CFM at 100 PSI:

• This is the rate of air flow through the device, which is 1.54 cubic feet per minute (CFM) at a pressure of 100 PSI. It's relevant for ensuring that the inflator can fill tires at a reasonable rate.

Measuring Range: PSI-BAR-KG/CM²-KPA:

• The device can measure pressure in four different units: PSI (pounds per square inch), BAR, KG/CM², and KPA (kilopascals).

Pressure Increments: 0.5 PSI / 0.05 BAR / 5 KPA:

• This refers to the smallest step in which the pressure can be increased or measured, ensuring precise adjustments.

Temperature Range for Use: -10°C ~ 45°C:

• The device is designed to operate in a wide range of temperatures, from -10°C to 45°C.

Power Supply: 1.5V * 2 (#4 Battery):

• The device is powered by two 1.5V batteries, commonly referred to as #4 batteries.