Digital battery level and voltage indicator MaxTuned

Digital indicator of battery level and voltage

Specifications:

• Voltage range: 6V - 73V / 7V - 100V
• Material: plastic
• Dimensions: 61.3mm x 33.3mm x 13.5mm
• Cord length: 30 cm
• Housing color: black

The indicator is designed for lead-acid batteries with a rated voltage of 12V, 24V, 36V, 48V (8-70V) and for 3.7V lithium cells.

Modes of operation:

• S1 - Charge level indicator alternates with the current voltage in a 2-second cycle.
• S2 - After pressing the button, the indicator turns on for 10 seconds and then turns off to save energy.
• S3 - The indicator lights up when the button is pressed.
• S4 - The indicator displays the logo (applies to the mode with a small battery icon). The logo icon is located under the battery symbol on the left side of the display. Enable to display logo.
• S5 - Discharge mode selection. It displays two types of battery discharge curve. Different conditions are converted to determine the correct discharge mode.

Making settings:

1. Disconnect the module from the power supply. Press and hold the setting button, reconnect the power and release the button. The display will show the current setting parameters.
2. Press the setting button in R / L / F sequence (P - 12V lead-acid battery, L - 3.7V lithium cell, F - 3.2V LiFePo cell).
3. Press the function button to set the number of cells in the battery.
4. Press and hold the function button for a long time to enter the advanced setting mode. Using the setting button to select from S1-S5. Press Enter to select or cancel the current mode.
5. Reconnect the power after setting. The settings will be saved automatically.

Ex: S1 mode (alternating display of charge status and voltage) for 10-cell lithium battery - Disconnect the power, press and hold the setting button, connect the power supply, short press the setting button selecting L,
press the button to select 10, press and hold the function button to select S1 and connect to power.