Headwave Premium Tag 2 Driving School Instruction System

The Headwave Tag 2 is a wireless instruction system for motorcycle helmets.

It is an extension of the Headwave Tag 2 and specially adapted to the requirements of driving schools, driving safety training and race track instructions. The driving school tag also uses Headwave's patented technology, where the sound is transmitted directly through the helmet shell. The device is only attached to the outside of the helmet. There is no need to install anything inside the helmet itself. This eliminates the hygienic factor of using headphones or flat speakers. The vibrations are reliably transmitted via a special reusable gel pad. The device is securely attached to the helmet by a flexible rubber band, just like ski goggles.

The driving school tag can be removed and changed from one helmet to the next within seconds. It fits on every helmet, works in all weather conditions and can be coupled in many ways. It can be used together with conventional radio systems or together with a Com-System. It does not replace the radio system but serves as a loudspeaker. The system enables one-way communication. The instructor can give instructions. However, answers from the participant/student are not transmitted back because there is no microphone. The system comes in a set with a Bluetooth converter. Together with a Com-System it has a range of up to 1.2 km in open terrain. Here the driving instructor receives the 1st Com device and the learner driver receives the 2nd Com device in a belt pouch or under the passenger seat. The Bluetooth transmitter connected to it sends the signal directly to the day. This solution is also suitable for the use of instructional drives on race tracks. The driving school TĀG can also be used in combination with a classic radio system. For this purpose, only a Bluetooth converter is plugged into the audio output of the radio and connected to the tag. Day for instructions makes possible by its simplicity also a use together with the hands-free system of the driving school car. It is connected to a cell phone via Bluetooth and given to the learner driver. The driving school teacher then simply uses the hands-free system of his car to call the participant and thus establish a solid connection. This kind of use is range-independent and inexpensive, since no additional Com system must be purchased. The system is legally applicable in the driving school car by this kind of use.

Features:

• waterproof, dustproof, shock resistant according to IP67
• clear voice instructions (by doubling the high tones a clear sound image is achieved - even with wind noise)
• flexible material adapts to any helmet
• magnetic charging cable (fits into any 5V USB output)
• external attachment from the outside of the helmet (nothing needs to be installed inside the helmet)
• 100 % wireless (nothing can pinch, jam or restrict your movements)
• is controlled by only one button (volume can be adjusted by volume buttons on top of the device)

Specifications:

• Battery: Lithium-Polymer, 800 mAh
• Battery life: over 24 hours
• Bluetooth: 4.1 (cell phone or navigation system / HFP v1.6, AVRCP v1.4, A2DP v1.2, HSP v1.2, Bluetooth® class 3)
• Bluetooth connections: 1 connection, no multipoint
• Bluetooth transmitter: included (can maintain two Bluetooth connections simultaneously / converts audio signal to Bluetooth)
• Dimensions: 123 x 61 x 23 mm
• Temperature range: -15°C to 50°C

Compatibility:

• motorcycle helmets
• bluetooth ready smartphone
• conventional radio systems
• Com systems

Contents:

• 1 x Headwave instruction system
• 1 x Cardo Freecom 4+ Duo / JBL Communication Double Set
• 1 x Headset with Cardo mounting plate
• incl. charger, cable, microphones, helmet loudspeaker