Battery charger UNIT GRANDE 6V-12V, 1.3Ah-120Ah.

Technical data:
Sealing of the device: IP65
Maximum charging voltage: 14.6V
Intensity: 6.5A
Battery usage: 6V. 12V. 1.3-120 Ah
Power supply: 220V AC-240V AC
Charger: for lead-acid, gel, maintenance-free, AGM and lithium batteries.

This type of charger can service 6V and 12V batteries, including traditional lead acid, maintenance-free, AGM and lithium batteries, widely used in motorcycles, cars, snowmobiles, ATVs, motorboats, solar systems and more.

Maintenance mode (ideal for connecting the battery in winter and charging it cyclically. This prevents battery damage during long winter stops).

Charging steps:

1. Sulfur removal
Upon detecting plate sulfate, the charger will enter desulfurization mode, in which pulsing voltage and current intensity allows the removal of sulfur deposits from the lead plates.

2. 1/2 DC
Charging the battery up to 25% of its capacity with an intensity equal to half the nominal value.

3. Constant intensity.
Charging the battery up to 50% of its capacity with maximum current.

4. Constant voltage.
Charging the battery up to 75% capacity at constant voltage.

5. Control.
Check the available capacity. If the battery cannot store enough power, it needs to be replaced.

6. Service.
Recharging a partially used battery to maximize battery life.

7. Supplement.
Battery charging up to 100%.

8. Diagnosis.
Checking if the battery is fully charged.

9. Supervision
The charger will keep the battery fully charged at low power.