.

  • On sale
  • New

ECU MALOSSI Force Master 3 Yamaha TMAX 560 22->

€ 636.58
€ 552.28  



Product code:  289735

Quantity

Have you heard of the theory that argues we use only twenty per cent of our brain? With Force Master 3 you'll use a hundred per cent... of your engine!

To improve our most advance control module, we designed with vision, starting with the milestones achieved so far. Thus was conceived Force Master 3, a futuristic control module both in hardware and in software.

LAMBDA MODULATOR

The original control module of the scooter, for analysis of the air/fuel ratio and to adjust the carburetion accordingly, normally interfaces with the lambda sensor installed on the silencer.

force Master 3 intercepts the signal of the original sensor, sending to the primary control module the values produced by a "virtual" lambda and allowing dynamic and customised management of the air/fuel ratio in all the moments for which the original system would be programmed to analyse the results of the lamba sensor.

It has finally becomes possible to manage the air/fuel ratio of the carburetion between the idle and transmission zones, essentially for all those rpm and for those conditions in which control of the operations of the lambda might prevent intervention .

Thanks to a highly evolved circuit, the electrical disturbances normally present on the throttle position signal are removed in such a way as to allow more precise identification of its real degree of opening and significantly improving response times, all to the advantage of the performance and efficiency of the engine.

 

HARDWARE AND INTERFACE

Accompanying a hardware, there therefore needs to be a microprocessor with very high computing power thatwould enable the Malossi technicians to introduce new software strategies and to take advantage of all the ForceMaster 3 potentials.

Technical features:

  • Fuel adjustment
  • ± 14% al LOW / HIGH / MID
  • RPM limiter : + 700 RPM
  • 4 different maps
  • Lambda emulator
  • Temperature range = -20°C +80°C
  • Minimum working voltage = +7V
  • Maximum working voltage = +16V
  • Average current consumption <- 200mA
  • Environmental protection = IP65

4 different maps :

  • curve 0 : original cylinder, Malossi exhaust system with db-killer, original filter, original air box, original camshaft, original head, original throttle, original air intake system
  • curve 1 : original cylinder, Malossi exhaust system without DB killer, original filter, original air box, Malossi camshaft, original head, original throttle, original air intake system
  • curve 2 : original cylinder, Malossi exhaust system without DB killer, Malossi filter, original air box, Malossi camshaft, original head, original throttle, Malossi air intake system
  • curve 3 : original cylinder, Malossi exhaust system without DB killer, Malossi filter, original air box, Malossi camshaft, original head, Malossi throttle, original air intake system

Fits for models:
Yamaha TMAX 560cc 2022-2025
Yamaha TMAX 560cc Tech Max 2022-2025

MALLOSI


MALOSSI - founded by Armando Malossi in Italy in 1930 as a manufacturer of sports parts for scooters. Initially, the company specialized in the development of carburetors for Dell'orto motorcycles. This strong association continues today as the company offers a huge range of carburetors and various kits for scooters and motorcycles. Cylinders and variators for racing and road use are also available from Malossi. Currently, the company produces two product lines - "Malossi" and "MHR" (Malossi Hyper Racing).

Brand Model Year Name CC
YAMAHA XP 2022 T-Max Tech Max 560
YAMAHA XP 2022 T-Max 560
YAMAHA XP 2023 T-Max 560
YAMAHA XP 2023 T-Max Tech Max 560
YAMAHA XP 2024 T-Max 560
YAMAHA XP 2024 T-Max Tech Max 560